The bathroom cabinet is not only afraid of humidity, but also of high temperature, sharp objects, and chemicals. A little carelessness will bring indelible marks to the bathroom cabinet, not only cracking but even accelerated aging. So, how should the bathroom cabinet be maintained?

There are various materials for bathroom cabinet surfaces. Natural materials include stone, ceramics, solid wood, MDF, etc., and metal chemical materials include PVC, acrylic, stainless steel, etc. Bathroom cabinets with different surface materials should be maintained differently.

1. Stone porcelain surface material: anti-blind cleaning, configuration, and use of soft water care.

Natural stone and ceramics are commonly used surface materials for bathroom cabinets. When cleaning, try to configure and use soft water to avoid hard water leaving deposits on the stone and ceramic surfaces.

Soft water identification: Take a cup of hot water, pour in soapy water and stir gently. The water with foam on the water surface is soft water, and the scum on the water surface is hard water.

If you want to further maintain the bathroom cabinet with stone and ceramic as the surface material, you can also use the permeable stone protective agent for regular maintenance. In addition, the bathroom countertop made of natural stone can also be polished regularly.

2. Solid wood surface material: anti-cracking deformation, good dry and wet separation.

Wooden bathroom sanitary ware should be prevented from drying, cracking, and deformation. After maintenance, a relatively moist pure cotton rag should be used to wipe the wood texture inside and outside after diluting the detergent.

Wooden bathroom cabinets have relatively strict requirements on the environment in the bathroom - that is, the separation of dry and wet, and it is usually separated from other areas to avoid direct sunlight, prevent local cracking of wood, deformation, and local discoloration of the paint film.

3. PVC and acrylic surface materials: Beware of softening of the material, and it is very important to clean it in time. The PVC bathroom cabinet should be kept away from heat sources above 70 °C to avoid water staying on the table for a long time. All benzene-based solvents and resin-based solvents should not be used for panel cleaning. agent, otherwise it will deform for a long time.

It should be noted that acrylic materials are more difficult to resist the erosion of paint and some organic solvents. If organic solvents contaminate the surface, attention should be paid to timely treatment.

4. Metal surface material: anti-corrosion, do not use sharp materials to clean the surface

For bathroom cabinets made of metal, do not pry up the metal decorative materials on the surface, and avoid cleaning the surface of metal objects with sharp materials such as steel balls and corrosive liquids.

If there is any stain on the metal surface of the bathroom cabinet, it can be gently scraped off with a thin bamboo sheet, and then wiped with vinegar cotton gauze.