What to do if the faucet leaks？- Shaoxing Shangyu Pinshang Kitchen & Bath Co., Ltd.

Faucets are hardware products that are often used in life. We must pay attention to the use of faucets. If the faucet leaks during use, it is also very common. It must be solved in time, so as not to affect the normal life of the family. and use. So what to do if the faucet leaks? How should I use the faucet correctly? Let's take a look at these questions.

The faucet feels loose, and the water outlet keeps dripping. No matter how hard the faucet is tightened at home, it will still drip. In this case, you can disassemble the faucet and replace the plastic gasket inside the faucet, so that water will not drip. You can even directly use plastic waste at home to cut it into the size of a faucet pipe and replace it.

1. There is water seepage at the valve core of the faucet, and there is water leakage at the valve core. It is estimated that the faucet is used too hard or the faucet has been used for a long time, which has caused the valve core to loosen or be separated from the medium in the connecting part. At this time, just remove the faucet. Just re-install and tighten.

2. There is water leakage at the joint of the faucet. If the joint of the pipe sees water, it is generally used for a long time, which causes the nut of the faucet to become loose or rusted. Just buy a new one or put an extra gasket to prevent leaks.

How to use the faucet correctly

Some friends think that the tighter the faucet is tightened after each use of water, the better, so that the faucet will not leak. In fact, this is a wrong approach. Usually, when we use the faucet, we should turn it on and off lightly, and do not bump the faucet with a relatively hard object.

1. For the use of the bathtub faucet, the metal hose of the shower head should be kept in a natural stretched state. Do not coil it on the faucet when not in use. When in use or not in use, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking. or damage the hose.

2. Regular cleaning of the surface, reasonable use and regular cleaning of the faucet can prolong its service life and keep it as bright as new. It is best to clean the surface of the faucet every other month. The usual cleaning with clean water can rinse the surface of the stains, and then dry it with a soft rag. Car wax should be used for maintenance and cleaning of the surface once a month to keep it bright.

3. The internal cleaning of the faucet, the cleaning of the surface is for aesthetics, and the internal cleaning is the most important factor affecting the service life. If the water volume of the faucet is reduced or the water is split, it means that the bubbler of the faucet is blocked. At this time, the bubbler should be removed. After soaking in vinegar, use a small brush or other tools to clean the sundries, and then try again. Installed.

If there is a phenomenon of water leakage from the faucet, it is recommended to find the cause in time and solve it, so as not to affect the use of your family, and add trouble to your family. The above is the relevant introduction about how to deal with leaking faucets and how to use the faucet correctly in peacetime. You should pay attention to regular cleaning during the process of using the faucet, and also pay attention to the correct use method.